Contacts：Mr. Wang or Mr. Shan
Telephone：022-22161189
Mobile phone：86+13902109323 or 86+15022523846
Website：Ultrafast Laser (Tianjin) Machinery Equipment Co., Ltd.
E-mail：uflaser_tj@163.com
Address：No. 3, Tongwang Road, Wangqingtuo Town, Wuqing District, Tianjin
High-speed, high-performance, high-power, large-format, fully enclosed, automatic exchange, precision type
Device model | UFL6020DF-2000GS | UFL6020DF-3000GS | UFL6020DF-4000GS | UFL6020DF-6000GS |
Laser wavelength | 1070nm | 1070nm | 1070nm | 1070nm |
Rated output power | 2000W | 3000W | 4000W | 6000W |
Laser power smoothness | ≤±1 % | ≤±1 % | ≤±1 % | ≤±1 % |
Large air travel speed | 120m/min | 120m/min | 120m/min | 120m/min |
Beam quality | ＜0.373mrad | ＜0.373mrad | ＜0.373mrad | ＜0.373mrad |
Effective Mass Cut Thickness | 0.5-16mm(carbon steel） | 0.5-20mm(carbon steel） | 0.5-20mm(carbon steel） | 0.5-25mm(carbon steel） |
Effective cutting range | 6000×2000mm | 6000×2000mm | 6000×2000mm | 6000×2000mm |
Large cutting thickness | Carbon steel 18mm (Stainless Steel 10mm) | Carbon steel 22mm (Stainless Steel 12mm) | Carbon steel 22mm (Stainless Steel 14mm) | Carbon steel 25mm (Stainless Steel 16mm) |
X,Y Positioning accuracy | ±0.02mm | ±0.02mm | ±0.02mm | ±0.02mm |
X,Y Repeatability | ±0.015mm | ±0.015mm | ±0.015mm | ±0.015mm |
Electricity demand | 380V/50Hz | 380V/50Hz | 380V/50Hz | 380V/50Hz |
Product description:
1. The ultra-fast laser uses an advanced laser generator and a high-speed servo drive control system, and the cutting speed is 20% higher than other products of the same power.
2. The high-strength, high-rigidity body mechanism ensures reliable and stable accuracy under high-speed dynamics.
3. The innovative optimized design realizes the production mode of high power and low energy consumption, which saves energy consumption by 15% compared with similar products.
4. Breakthrough process innovation, ultra-fast laser broadens the processing range of non-ferrous metals (copper, aluminum, galvanized sheet), and at the same time realizes the processing of small holes far smaller than the thickness of the plate, making it possible to process non-metallic materials with fiber laser.
5. Synchronous and parallel exchange of worktables, when cutting large-format thick plates, the exchange is more stable, and the processing range (square tubes, round tubes and other special-shaped sheets) can be expanded on the lower worktable.
6. Fully automatic segmented dust removal control, more environmentally friendly in the cutting process.
Cutting video:
Previous：Laser cutting machine manufacturer
Next:Custom Laser Cutting Machine